Concrete boom pump company
Top concrete boom pump company in China supply concrete pump truck with boom length of 32-54m. The main purpose of the boom of the concrete pump truck is cloth. The position of the boom needs to be constantly changed during normal distributing. The center of gravity of the vehicle is different for different boom positions. In addition, the vibration of the boom and ground settlement during the construction process may also change the center of gravity of the concrete pump truck. If the center of gravity goes out of the range of the outriggers, it will cause the pump truck to tip over.
You need to be vigilant during daily use. At present, major concrete boom pump company have more or less added intelligent anti-tilting measures. These measures are mainly divided into two categories: inclination devices for detecting the level of the whole boom concrete pump truck and force detection on outriggers sensor. The inclination sensor can sense the level of the whole concrete boom pump and send the level angle information in real time, which can effectively avoid the overturning of the whole pump truck caused by the slow ground subsidence. The function of the tilt sensor is to measure the tilt angle of the truck in real time. The measurement accuracy of the tilt sensor is higher than 0.05 degrees. It can filter out the small tremor caused by the vibration of the engine and the pump, and trigger an alarm when the left-right angle is greater than 3 degrees or the front-back angle is greater than 5 degrees. The outrigger force sensor detects the force of each outrigger in real time. When the force of two outriggers on a certain side is less than a certain value, it will promptly warn or terminate the current action.
As a professional concrete boom pump company, Haomei manufacturing concrete pump truck with different chassis according to the customers requirements. In addition, we offer free training and best after sale service.